Hey friends! Thanks so much for liking my table and coming to check out the plans.
Two things: This plan is meant to go along with the photo tutorial. The tutorial shares all the steps and photos of each step, but this has all the measurements. You can print or email yourself the photo tutorial post, then do the same with these images. I hope that helps make it clear!
Cut the boards to the proper lengths and round off the edges with a router.
Measure and attach the 24.5″ round-edged boards to the legs with even spacing.
Glue and countersink screws into each leg.
Attach the 26.5″ boards by gluing and clamping them until the glue cures.
Flip the 30×42″ tabletop upside down and align the legs evenly. Add glue, then countersink screws through the leg sections between each leg into the tabletop. Then attach supports with pocket holes to each leg section. Finally countersink some short screws through the supports into the tabletop.
There you have it! The table is finished! Paint or finish however you please!
I hope you loved this plan! If you find any errors, please let me know by emailing me at hazelandgold@gmail.com.
Thanks friends! Keep building!
~~Sheri
