DIY Glossy Photo Wood Slice

DIY Glossy Photo Wood Slice

One of my favorite things about DIY projects is the ability to make them completely custom to my life, family and home. This DIY Glossy Photo Wood Slice is absolutely one of those types of projects. When we moved here last year we were so excited to be near Lake Michigan and to have some summer beaches to go to! People that live near the coast just don’t realize how precious that is, and that those of us who live in the center of the country totally miss out.

(This is a sponsored post which I was paid to write as part of Resin Crafts Creative Team. All opinions are mind. There are some affiliate links in this post which simply means that I get a small commission if you purchase through those links, at no cost to you. More details can be found in my Disclosure page. Thanks for supporting my small venture!)

During our first family trip to the beach (even though it was still cold) my daughter took this picture of my husband and I walking along the beach with our dog. It has been one of my favorites, and I am so excited to show you how I incorporated it into our decor without just putting it into another simple frame on a wall.

Glossy Photo transfer Wood Slice - completed 2

Here’s the process I used to make a glossy photo wood slice!

Supplies:

Alright, so once you’ve got all your supplies together, you’ll just need a really clean work area and level work surface. You’ll want a fairly warm area without any fans or air movement so that no dust or debris gets into the resin after it is poured.

Photo Transfer to Wood Slice:

The first step is to transfer the photo to the wood. This isn’t required, you could always just seal the photo onto the wood, but I wanted the wood grain to show through a bit, so I opted to do a transfer. Here is that process:

If transferring the photo isn’t your thing, check out Woodsnap! They make gorgeous photo prints on wood. (aff link)WoodSnap

First, get your wood slice, laser printed photo, Ultra Seal or ModPodge, and craft brush. Trim your photo to fit onto your wood slice. Remember that the photo will be placed face down if you are transferring it to the wood, so it will be flipped on the wood slice. This is only a concern if you have letters or numbers in your photo because they will be backward. If this is a concern and you do want to do the transfer, you’ll need to flip the image in whatever photo software you use before you print it.

Glossy Wood Slice Photo Transfer - beginning supplies for transfer

Seal with Ultra Seal or ModPodge:

Next, completely cover the wood slice top in Ultra Seal using your craft brush. This will prep for adding the photo, and also seal the wood which is important to prevent bubbles during the Envirotex Lite stage. I put a generous coat of Ultra Seal, as you can see in the process photo below.

Glossy Wood Slice Photo Transfer - applying Ultra-Seal to wood slice

Quickly add the photo to the wet wood slice and press down to eliminate any bubbling in the paper. Then immediately coat the entire picture with Ultra Seal.

Glossy Wood Slice Photo Transfer - placing paper onto Ultra Seal

Let this dry overnight or for at least 12 hours.

Remove Photo Paper:

Now we’re going to remove the paper to show the ink from the image is now on the wood slice. To do this, we get a large towel wet. You don’t want it dripping but you don’t want it barely damp either. Just soak it and ring the water out really well. Then lay the towel on top of the paper, as shown, and let the water soak into it for about 15 minutes. I came back a couple times in those minutes and pressed down on the towel, just to be sure it would soak in.

Glossy Wood Slice Photo Transfer - applying wet towel to paper

Glossy Wood Slice Photo Transfer - pressing down towel to dampen paper

Next peel up part of the towel and start to rub on the wet paper lightly with your finger. It should begin to peel off. Be sure to rub gently, with barely any pressure from your fingers. If you rub too much in one area the ink will sometimes rub off. Once the paper looks like it’s gone, move to another area.

Glossy Wood Slice Photo Transfer - rub off paper

Now, it’s important to know that even though the paper is gone, as it dries sometimes it starts to appear white again as if paper is left. The best way to know if the paper is gone is get it wet again and if it is clear, then enough paper is gone and it will appear clear when you apply the epoxy. I hope that makes sense. The following pictures will help you understand. Some of the colors were much more sensitive and easily rubbed off. There are a few spots here where that happened, but I was quite happy with it overall, so I just went with it!

Glossy Wood Slice Photo Transfer - check paper with water, if white, rub more

Seal photo with Resin Spray:

Alright, so now that it’s all rubbed off, the final step for the photo wood slice process is to coat it with Resin Spray. I do this outside because it is pretty stinky. It dries quickly so I just spray in an area without wind and bring it back inside as soon as it is dry. This step will definitely show if you removed all the paper correctly because all the colors will return unless there is still too much paper.

Glossy Wood Slice Photo Transfer - spray resin spray outside

Glossy Wood Slice Photo Transfer - spraying resin spray

 

Alright, the next picture looks pretty bad, but really it’s just the angle I had the light on for the photo. I did this on purpose to show that there is still texture on the photo. It doesn’t look as rough straight on, but I’ve done this before and there’s always some texture. This is the main reason I thought Envirotex Lite would be PERFECT for this project! It makes a super glossy and glass smooth finish. I just love it.

Glossy Wood Slice Photo Transfer - spray on Resin Spray

Time for Envirotex Lite!

Alright, let’s get that perfect, glossy finish!

Grab your Envirotex Lite bottles, one resin and one hardener, also your stir sticks, mixing cups, craft brush, work surface tray or box, butane torch and item that will elevate the project. Put your wood slice photo on top of that item, inside the box. Read the directions thoroughly so you understand how it works and the DOs and DON’Ts. There are a few things you’ll want to understand, like temperature, curing time, and detailed mixing instructions.

Glossy Wood Slice Photo Transfer - prep and supplies for epoxy coating

Now we’re going to mix the resin. Pour 2 oz. of Part A of the resin into your mixing cup.

Glossy Wood Slice Photo Transfer - part A of Envirotex Lite

Add 2 oz of part B. It is very important to have exact equal amounts.

Glossy Wood Slice Photo Transfer - parts A and B poured Envirotex Lite

Stir the two parts together thoroughly. As you can see in the next two photos, when you begin to stir it is a little cloudy, but once they are mixed it gets much clearer with just bubbles (we’ll take care of those later!)

Glossy Wood Slice Photo Transfer - mixing Envirotex Lite parts A and B not completed cloudy

Glossy Wood Slice Photo Transfer - parts A and B mixed Envirotex Lite

Once it’s all mixed together, pour it into your SECOND cup and stir again thoroughly with your SECOND stir stick. This prevents any excess of one part or another from ruining the cure and causing sticky spots.

Once that’s done, we’re ready to pour!

Pouring Envirotex Lite:

Start pouring the resin in the center of the photo transfer wood slice, moving outwardly in a spiral. It will spread out fairly quickly, just make sure it coats the entire top.

Glossy Wood Slice Photo Transfer - pouring on Envirotex Lite

The resin will self-level as it spreads out and the excess will pour off the sides. This is why you want a good disposable material underneath that you’ll just be able to throw away, to catch the excess.

Glossy Wood Slice Photo Transfer - pouring on Envirotex Lite2

Okay, so it’s completely covered the top. For this project, because the sides are so uneven, I actually used a craft brush and painted resin onto the bark of the wood slice. I used the excess resin in the tray. This worked well and I don’t see another way to get it over and into all of the grooves. As the resin settles, you’ll also need to use your brush to wipe off the drips underneath all the sides. (You can see the reflection of my window and that just gets more clear as it settles.)

Glossy Wood Slice Photo Transfer - use paintbrush to wipe off drips

Wipe off the drips for a little while, but then take a short break and come back about 15-20 minutes later. Wipe off any remaining drips and use the micro butane torch (or exhale over the project) and pop the bubbles. The carbon dioxide is what will pop them, so your exhalation can work, but a butane torch is MUCH faster.

Glossy Wood Slice Photo Transfer - use micro butane torch to pop bubbles

Alright, now we just cover the project as carefully as possible and wait for it to cure. The recommended time varies depending on room temperature, but here is the information on the directions: At 70 degrees it takes 4-7 hours in dust free area and 72 hours for a hard cure. At 80 degrees it takes 3-6 hours dust free, and 48 hours for hard cure. And at 90 degrees it takes 2-5 hours dust free and 36 hours for a hard cure. I let mine sit for a few days under the covering just so I wouldn’t mess anything up. I’m so pleased with the results!

Finished!

As you can see in these finished photos, the light reflects off of this just like it would with glass. It’s just perfect and glossy and beautiful. I really love this product!

Glossy Wood Slice Photo Transfer - completed 2

Glossy Wood Slice Photo Transfer - completed

I hope you like this project and feel like you could make something similar! It takes a bit of time, but it really is simple and the results are awesome! I can think of so many applications for this Envirotex Lite and can’t wait to show you more!

If you like this photo transfer wood slice project, please share this pinnable image via Pinterest!

diy glossy photo transfer wood slice - resin crafts, wood slice project, photo transfer project, diy craft tutorial

Thanks for checking it out! What do you think of the glossy photo wood slice? I’d love to hear your comments. If you’ve done photo transfers before or would like to try, I’ll be sure to answer questions if you have them. Thanks for reading!

Check out my other Resin Crafts Creative Team projects!

  Custom Chocolate Molds, facebook social media image2

 Wood and Resin Pendant using EasyCast,social media wood and resin pendant

 Geographic Tile Coasters,geographic tile coasters envirotex Lite

~~Sheri~~

This project was originally posted by me on Resin Crafts Blog.



6 thoughts on “DIY Glossy Photo Wood Slice”

Leave a Reply

Your email address will not be published. Required fields are marked *

85 Shares
Tweet
Share20
Pin63
Stumble1
+11
Share